Configure Voipdb Networking Information - NEC SL1100 Networking Manual

Issue 6.0
2.2
Program
Program Name
Number
CPU Network Setup
– Default Gateway
10-12-03
CPU Network Setup
– IP Address
10-12-09
CPU Network Setup
10-12-10 – Subnet Mask
Program Number
84-26-01
84-26-02
84-26-03
10 - 4

Configure VoIPDB Networking Information

The VoIPDB DSP's (PRG 84-26-01) should be connected to the same IP
Subnet as the VoIPDB signaling address (PRG 10-12-09).
If any IP Address or NIC setting is changed, the system must be reset for

the changes to take affect.
Description/
Comments
Assign the IP Address for
the Router.
Assign the IP Address of
the VoIPDB.
Assign the Subnet Mask
of the VoIPDB.
2.2.1 VoIPDB (DSP) Basic Setup
Program Name
VoIPDB Basic Setup –
IP Address
VoIPDB Basic Setup –
RTP Port Number
VoIPDB Basic Setup –
RTCP Port Number
(RTP Port Number + 1)
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
0.0.0.0 ~ 126.255.255.254
128.0.0.13~191.255.255.254
192.0.0.1~223.255.255.254
Default is 172.16.0.10
255.255.0.0
Default is 255.255.0.0
Description/
Comments
Assign the IP Address
for the DSP resource.
Note: The VoIPDB IP
Addresses must be
statically assigned.
Assign the RTP Port
Number.
Assign the RTCP Port
Number.
Assigned Data
Assigned Data
Default:
Slot 1 = 172.16.0.20
0~65534
Default for DSP1 is
10020
0~65534
Default for DSP1 is
10021
IP Single Line Telephone
NEC SL1100
1 2 3
X
X
X
1 2 3
X
X
X