Entering Vlan Settings By Phone (Voice Packets Only) - NEC SL1100 Networking Manual

NEC SL1100
Networking Manual
13.5.4

Entering VLAN Settings by Phone (Voice Packets Only)

1. Press Hold, Transfer, *, # to enter programming mode.
2. Enter the user name of ADMIN and password of 6633222, then
press the OK softkey.
3. Dial 1 for Network Settings.
4. Press 6 on the dial pad for Advanced Settings
5. Press 1 on the dial pad for LAN Port Settings (VLAN for the
voice packets only)
6. Press 2 on the dial pad for VLAN Mode
7. Press 1 or 2 to disable/enable the VLAN for the voice packets.
Press the OK soft key after the setting is changed.
8. Press 3 on the dial pad for VLAN ID
9. Enter a valid VLAN ID of 1~4094. Press the OK soft key after
the setting is changed.
10. Press 4 on the dial pad for VLAN Priority
11. Enter the VLAN priority of 0~7. Press the OK soft key after the
setting is changed.
12. If no more changes are made, press the Exit soft key three
times. Then press the Save soft key, and the phone reboots.
13.5.5 Entering VLAN Settings for PC Port by Phone (Data Packets Only)
1. Press Hold, Transfer, *, # to enter programming mode.
2. Enter the user name of ADMIN and password of 6633222, then
press the OK softkey.
3. Press 1 on the dial pad for Network Settings.
4. Press 1 or 2 to disable/enable the VLAN for the data packets.
Press the OK soft key after the setting is changed.
5. Press 3 on the dial pad for Port VLAN ID.
6. Enter a valid VLAN ID of 1~4094. Press the OK soft key after
the setting is changed.
Issue 6.0
9 - 31