Caller Id Integration With Voice Mail; Second Call Caller Id (Extension Level Call Waiting Caller Id); Third Party Caller Id Check; Caller Id Display Separator - NEC DS1000 Product Description

Section 3: Features
Station Message Detail Recording
05/07/1999 09:10P
---+---+--------------------------------+----------+---------+--------+---
Sta|Lin|
---+---+--------------------------------+----------+---------+--------+---
301| 02|
301| 02|
301| 02|
301| 02|
40 N Section 3: Features
Following is a sample SMDR report showing Caller ID data. The first two lines of the report show
a complete MDMF record with both the caller's number and name. The last two lines of the report
show two Caller ID error messages: Private Number and Out of Area. the "IN" in the type column
indicates that the records shown are for incoming calls. If no DN is received, no number or error
message displays.
Number Dialed
Out of Area Number|

Caller ID Integration with Voice Mail

Caller ID fully integrates with IntraMail, UltraMail, and NVM-Series Voice Mail systems. This
enables Voice Mail features such as Make Call with Caller ID. Make Call allows the Voice Mail
subscriber to return a call to someone who left them a message without knowing the calling party's
phone number.

Second Call Caller ID (Extension Level Call Waiting Caller ID)

While a display keyset user is busy on a call, the system can show the Caller ID information for a
waiting call. If the busy extension is programmed to receive Camp On tones or Off-Hook Ringing
from the waiting call, the system will send the Caller ID data to the busy telephone's display. If the
busy extension does not receive Camp On tones or Off-Hook Ringing, it will also not receive the
waiting call's Caller ID. (Note that Caller ID data from a Camp On is displayed only once, corre-
sponding to the single Camp On beep.) This is an internal system feature and does not use the
telco's Call Waiting Caller ID.

Third Party Caller ID Check

Third Party Caller ID Check allows a keyset user to display the Caller ID data for another trunk.
The trunk that the user checks can be ringing or busy.

Caller ID Display Separator

An extension's display can optionally show a calling party number separator. The separator is a
dash after the area code and after the local exchange on a 7 or 10 digit number.

Caller ID Alert Lamp

An extension's Class of Service can enable or disable the Ring/Message Lamp for Caller ID. If
enabled, the lamp will flash whenever the extension receives new Caller ID logs. If disabled, the
lamp will not flash for Caller ID.

Caller ID Notes

G Caller ID is built in.
Caller ID is available at single line extensions (if enabled in programming).
G
Caller ID is not available at 2-OPX ports.
G
G In DS2000, be sure to use ATRU PCBs 80010B or 80011B or higher.
| Account |
2139261000|
ANDERSON ALLEN|
Private Number|
Start |Duration| T
|11:11:39A|00:01:13|IN
|11:11:39A|00:01:13|IN
|09:12:13P|00:01:12|IN
|09:12:07P|00:01:20|IN
DS1000/2000 Product Description