Central Office Calls, Placing; Using Line Keys; Using Line Dial-Up Or Direct Line Access - NEC DSX Feature Handbook

Central Office Calls, Placing
You can placing an outside call by:
• Pressing a Line Key
Your phone can have line keys for one-touch access to specific lines.
• Pressing a Loop Key
Loop Keys provide one-touch access to the assigned Loop Group. Loop Groups can consist of one or more Line Groups.
• Using Line Dial-Up
With Line Dial-Up, you can select a specific line by pressing
followed by the line number (1-64).
• Using Direct Line Access
Direct Line Access allows you to access a line by pressing
101 for line 1, 102 for line 2. etc.).
• Dialing a Line Group Access Code
You can also place outside calls by pressing
• Line Group Routing
If your system has Line Group Routing enabled, you get the first available line when you press
dial .
9

Using Line Keys

To place an outside call over a specific line using a line key:
1. Lift handset.
2. Press line key.
a) You hear dial tone on the line you select and the line key lights green.
b) You can also use Loop Keys for placing outside calls.
3. Dial outside number.
a) If the number doesn't dial out within 6 seconds, your system probably has Store and Forward enabled. Just
dial to have the call go through.
#

Using Line Dial-up or Direct Line Access

To place an outside call using Line Dial-up or Direct Line Access:
1. Lift handset.
2. Press
INTERCOM
3. Do one of the following:
a) For Line Dial-up, dial
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
INTERCOM
.
followed by the line number (e.g., 01 for line 1).
#9
and dialing the Line Dial-Up code (#9)
INTERCOM
and dialing the line's extension number (e.g.,
INTERCOM
and dialing a Line Group Access Code (90-98).
http://www.renderx.com/
Features
DSX | | 53
and then
INTERCOM