Transfer; Using Transfer - NEC DSX Feature Handbook

Transfer

Send your outside call to a co-worker.
Use Transfer to send (i.e., extend) your active call to a co-worker, Ring Group, UCD Group, or voice mail. A call that you
Transfer to a co-worker or group automatically recalls to you if it doesn't go through. If you forget to pick up the recall from
an outside call, it will divert to Key Ring so the caller doesn't get forgotten. You can Transfer both outside calls and Intercom
calls.
These are the following types of Transfer:
• Screened Transfer
You announce the call to your co-worker before hanging up.
• Unscreened Transfer
You extend the call to your co-worker without announcing it.
• Hotline Automatic Transfer
Just press your Hotline key to transfer your call to your Hotline partner.
• Handsfree Transfer
The outside call you Transfer goes right to your co-worker's speakerphone.

Using Transfer

To Transfer your call:
1. Do not hang up.
2. Press
TRANSFER
3. Do one of the following.
a) Dial your co-worker's extension.
b) Press a Call Coverage or Hotline key. (Also see Hotline Automatic Transfer below.)
c) Press a DSS key.
d) Dial a Ring Group or UCD Group master number.
4. Do one of the following.
a) Announce the call to make a Screened Transfer, then hang up.
b) Press the flashing line key to return to the call if your co-worker doesn't want it.
c) Hang up to send the call through unscreened.
d) Press
V_MAIL
5. If unanswered, your call will recall to you. If you don't answer the recall, the call normally diverts to Key Ring.
To Transfer your call directly to a co-worker's mailbox:
1. Do not hang up.
2. Press
TRANSFER
3. Press .
V-MAIL
4. Dial your co-worker's extension number.
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
.
to Transfer the call to your co-worker's mailbox.
.
DSX |
http://www.renderx.com/
Features
| 177