To Place A Call On Exclusive Hold; To Transfer A Call - NEC DT830 Series User Manual

TO PLACE A CALL ON EXCLUSIVE
HOLD
DT830 DT430/410
STEP 1: Press
HOLD
ance indicates interrupted wink.
E_HOLD
1:25 PM
Mic
Note: If held line key appears on other stations, LED
remains steadily lit red.
To Retrieve
STEP 1: Lift the handset or press
STEP 2: Press the held line key. Use the handset to
converse.
Note: Only the terminal that set Exclusive Hold option
can retrieve the call.
If unanswered
STEP 1: After preprogrammed time, Automatic Recall
is initiated.
STEP 2: Visual and audible signal (rapid flash and ring
burst) is sent to the station which placed call
on Exclusive Hold. Recall shows as a flash-
ing green LED on your phone, and solid red
on other phones with same line.
key twice. The line key appear-
Held Station Number
2001
MON 11 MAY 2015
>>>
Speaker
key.
Note: Exclusive Hold excludes any other phone from
picking up your held call. Exclusive Hold shows
as a flashing green LED on your phone. The
same line on other phones appears as a solid red
LED.

TO TRANSFER A CALL

DT830 DT430/410
STEP 1: After conversing, ask the other party to hold.
STEP 2: Press
Transfer
dial tone.
TRANSFER
1:25 PM
Mic
STEP 3: Dial destination station's extension, hang up
or wait for answer.
TRANSFER
1:25 PM
Mic
STEP 4: If transferring party hangs up, that station's
number appears in the center of recipient's
display.
Transferring station
TRANSFER 2000
1:25 PM
Mic
101
key. Receive an interrupted
MON 11 MAY 2015
>>>
Transferred station
or trunk number
2001
MON 11 MAY 2015
>>>
DDD 3
MON 11 MAY 2015
>>>