To Answer A Camped-On Call; Call Waiting - Originating - NEC DT830 Series User Manual

TO ANSWER A CAMPED-ON CALL

DT830 DT430/410
STEP 1: While engaged in a call, receive the camp-on
indication (one short tone burst). LED of
key flashes.
Answer
STEP 2: Press
Answer
on hold.
STEP 3: Connection to camped-on call is established.
STEP 4: Press
Answer
Camped-on call is placed on hold.
STEP 5: By repeating these steps, it is possible to al-
ternate between calls. The display indicates
connected station or trunk at any given time.
CAMP ON DDD
1:25 PM
key. Call in progress is placed
key to return to original call.
Trunk Trunk
type number
3
MON 11 MAY 2015

CALL WAITING - ORIGINATING

DT830 DT430/410
To Program Call Waiting Key (On One-
Touch Speed Calling Key)
STEP 1: Press
Feature
STEP 2: Press the desired One-Touch Speed Call-
ing key.
STEP 3: Press
Recall
STEP 4: Dial the "Call Waiting" feature access code.
STEP 5: Press
Feature
Note: To program a hook switch for transfer or feature
activation, press
plays on LCD.
To Activate Call Waiting – Originating
STEP 1: Dial the desired station number, receive a
busy tone.
STEP 2: Press the CALL WAITING key.
STEP 3: Receive a special ringback tone.
138
key.
key, "!" appears on the LCD.
key.
as first digit. "!" dis-
Recall