Dial Intercom - NEC DT830 Series User Manual

To Bridge Into A Manual Intercom Call
Note:
Bridging is an optional feature.
STEP 1: Press the MICM key, lift the handset or press
Speaker key.
OVERRIDE
1:25 PM
STEP 2: A three-party conference is established.
CONF
1:25 PM
Note:
The SIG key signals the corresponding station
when speaking over the intercom path is unnec-
essary.
Note: Two-button Manual Intercom provides one button
for signaling and one for talking. A separate sig-
naling button can be used in many ways for the
secretary to alert a boss, or vice versa.
Overriding party
1
MON 11 MAY 2015
MON 11 MAY 2015

DIAL INTERCOM

To Initiate
STEP 1: Lift the handset or press the
STEP 2: Press the DICM key.
STEP 3: Dial the desired intercom station number. Re-
ceive a ringback tone.
ICM
1:25 PM
To Answer
STEP 1: The DICM key flashes, indicating an incom-
ing intercom call.
STEP 2: Press the DICM key.
STEP 3: Lift the handset or press
LED lights solid green.
ICM
1:25 PM
Note:
When the called station is engaged with a non-
intercom call, the called station user presses the
DICM key to answer the incoming call after plac-
ing the non-intercom caller on hold (with
key).
136
DT830 DT430/410
Speaker
Called party
2
MON 11 MAY 2015
Speaker
key. The
Calling party
2
MON 11 MAY 2015
key.
HOLD