NEC DT830 Series User Manual page 95

Note: For details on character entry method, see
TO INPUT CHARACTERS
Operation.
Note:
A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
Note: To delete an entered character, press the BK soft
key.
Press the Enc soft key to download the encrypted
restore file.
The encrypted restore file name is displayed as
"PersonalData.tgz.ef".
[Data Backup]
Input a folder name.
PersonalData.tgz.ef
BK NoEnc
Note:
If you change the encrypted file into the unen-
crypted file, press the NoEnc soft key.
STEP 19:Press or the Exec soft key to start restor-
ing the backup data to the telephone. While
downloading the backup data, the LCD dis-
plays "Downloading..." first and then "Sav-
ing...".
Note: Be sure not to turn OFF the DT830 Series while
"Saving..." is displayed on the LCD.
HOW
in chapter 4 Basic
A
Cancel Exec
STEP 20:After the downloading process is complete,
the display changes as follows:
Download Complete!
The display goes back to the Backup/
Restore screen by the Exit soft key.
Note: When the downloading process ends in failure,
"Download Failed!" is displayed on the LCD.
Check to see the following and then make a retry.
Check Points
Download file is not
placed in the specified
directory.
A different file name is
specified between
DT830 Series and FTP/
TFTP server.
Incorrect IP address of
FTP/TFTP server has
been entered from the
telephone.
The power to FTP/TFTP
server or network
equipment is OFF.
LAN cable is
disconnected.
86
Exit
Actions
Place the download file in
the specified directory.
Set the same file name
from both DT830 Series
and FTP/TFTP server.
Set the proper IP address
of FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.