Menu Item
7. Advanced
1.Backlight Fade
Control
4 Change Password
5 Security
6 Peripherals
1.USB Memory
2.BCA Option
1.BCA Connection
Settings
1. Auto
Connection
2. Connection
Cycle
2.Interrupt Ringing
3.Smart Device
Type
4.Auto Path Switch
5.Illumination
Description
Sets other data for display.
Sets whether Backlight Fade Control is in service, when
turning on/off the backlight of the display. (Disable/Enable)
Select this option to change the password to lock/unlock the
telephone.
Not used.
*Security key must be programmed in advance. For the
programming of Security key, contact the system
administrator.
Select this option to use peripheral equipment of terminal.
Not used.
Select this option to configure the BCA.
Select this option to make the BCA connection settings.
Select this option to use Auto Connection.
(Disable/Enable)
Select this option to set Bluetooth connection cycle.
(3 Seconds/10 Seconds/1 Minute/10 Minutes)
Select this option to specify whether to use Interrupt Ringing.
(Disable/Enable)
Select this option to set the type of Smart Device.
(Type 1/Type 2)
Select this option to specify whether to use Auto Path Switch
(Disable/Enable)
Select this option to Set the illumination pattern (color) for
informing call termination.
(Disable/Red/Green/Blue/Yellow/Purple/Light Blue/White/
Rotation)
235
Default Value
-
Enable
0000
-
-
-
-
-
Enable
10 Seconds
Enable
Type 1
Enable
Blue