NEC DT830 Series User Manual page 125

STEP 3: When DT830 Series is placed in Security
mode, Security Lamp lights red and the
screen saver will be activated.
Security Lock
• To Unlock the Telephone
STEP 1: Display the Password Entry screen by either
of the following operations.
• Press any key while the screen saver is
activated.
• Press the Security key while the screen saver
is activated.
Security lock will be released.
Please input a password.
BK
Cancel OK
STEP 2: Enter the password and then press
OK soft key. Security Lamp is extinguished
and Security Mode is canceled.
Note:
When the password entry ends in failure, the fol-
lowing error message is issued. In that case,
press
Note: After a third attempt (if incorrect password
entered three times), the following error message
is issued. Press
phone locks up, and any key operation will be
disabled for 10 minutes. After 10 minutes, make
a retry.
Incorrect security code
password entered.
Note: If you forget the password, please contact the
system administrator.
116
or the OK soft key and then retry.
Password Error.
Retry?
OK
Cancel
or the OK soft key. The tele-
OK
or the