To Logout; Display Enlarged Characters - NEC DT830 Series User Manual

TO LOGOUT

DT830
STEP 1: Press the preassigned Logout Feature key
on the terminal.
Note: The following soft key location is an example.
Note: The Logout key is assigned by the system
administrator.
7:25 AM MON 11 MAY 2015
Mic NoDist
STEP 2: "LOGOUT?" is displayed on the LCD of the
terminal.
LOGOUT?
7:25 AM MON 11 MAY 2015
Logout
STEP 3: Press the Logout Feature key again, or the
Logout soft key on the terminal. The terminal
displays the Login screen.
Login ID :
Password :
Cancel Back
Logout >>>
>>>
-
Set OK
DISPLAY ENLARGED CHARAC-
TERS
DT830
This feature enables to display characters height as a
double height size for the terminal information on the
LCD. The indication of enlarged characters is available
for 2nd line or 3rd line on the LCD. The line displayed
as enlarged characters can be switched by using the
Line/Feature key for "Display Enlarged Characters".
Note: The feature key of "Display Enlarged Characters"
is assigned at installation. For details, contact the
system administrator.
93