NEC DT830 Series User Manual page 157

Using Soft Key
STEP 1: Press the CF-Busy soft key. Receive a spe-
cial dial tone.
STEP 2: Dial the destination; wait for a service set
tone.
STEP 3: "FORWARD SET" is displayed; Call Forward-
ing – Busy Line is set.
FORWARD SET
1:25 PM
Mic
To Verify (Only For Terminal With LCD)
STEP 1: Press the FWD-BY key.
STEP 2: The display indicates the station number calls
are forwarded to.
FORWARD
1:25 PM MON 11 MAY 2015
Note:
With soft key operation, the CF-Busy flashes on
the display.
MON 11 MAY 2015
>>>
Forwarding station
2000
To Cancel
Speaker
STEP 1: Press
celing for another station, press MULTILINE
APPEARANCE feature key.
STEP 2: Press the FWD-BY key or dial "Call Forward-
ing – Busy Line" cancel code. Receive ser-
vice set tone. LED goes out at your station (or
the terminal of the multiline station).
Speaker
STEP 3: Press
Line is cancelled.
FORWARD CANCEL
1:25 PM
Using Soft Key
STEP 1: Press the CF-Busy soft key.
STEP 2: Receive a service set tone and "FORWARD
CANCEL" is displayed.
FORWARD CANCEL
1:25 PM
Mic
148
key. Receive a dial tone. If can-
key. Call Forwarding – Busy
MON 11 MAY 2015
MON 11 MAY 2015
>>>