Attendant Position; Calling The Attendant - NEC DSX Feature Handbook

Attendant Position

If you are the attendant, your extension is the focal point for call processing within the system. Your system can have up to
four attendants. In addition to the features of a standard keyset, an attendant also has the following unique capabilities (refer
to the respective feature for details):
• Attendant Call Queuing
• Barge In (Intrusion)
• Direct Line Access
• Forced Line Disconnect
• line Queuing / Line Callback
• Night Service / Night Ring
• Removing Lines and Extensions from Service
For maximum efficiency, you should use a 34-Button Display or 34-Button Super Display Telephone. In addition, you should
find a DSS Console helpful when processing calls.

Calling the Attendant

To call the attendant:
1. Press
INTERCOM
2. Dial .
0
a) You hear two beeps.
b) This calls the attendant assigned to your extension. If your system has multiple attendants, you can reach
them by dialing
c) In a multiple attendant system, you can dial
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
.
- .
01 04
and wait on the line to automatically call operator 1.
0
http://www.renderx.com/
Features
DSX | | 25