NEC DSX Feature Handbook page 178

Features
178 | DSX |
5. Hang up.
To Transfer your call using Hotline Automatic Transfer:
1. Do not hang up.
2. Press a Hotline key.
3. Do one of the following.
a) Announce the call to make a Screened Transfer, then hang up.
b) Press the flashing line key to return to the call if your co-worker doesn't want it.
c) Hang up to send the call through unscreened.
d) Press
V_MAIL
4. Hang up.
a) If you don't have Hotline Automatic Transfer enabled for your extension, hanging up in this step disconnects
the call.
To Transfer a call to your co-worker's speakerphone using Handsfree Transfer:
1. While on an outside call, do one of the following.
a) Press
TRANSFER
b) Press Hotline key for your co-worker.
2. Listen for two beeps.
a) If you hear ringing instead of two beeps, you cannot use Handsfree Transfer.
3. Press
FLASH
a) You can optionally press
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
to Transfer the call to your co-worker's mailbox.
and dial a co-worker's extension number.
to send the call directly to your co-worker's speakerphone.
to get Intercom dial tone and select another co-worker for the Transfer.
TRANSFER
http://www.renderx.com/