Central Office Calls, Answering; Answering Outside Calls - NEC DSX Feature Handbook

Features
50 | DSX |
Central Office Calls Answering
Outside calls can ring your extension.
If multiple calls are ringing your phone simultaneously, the system prioritizes them in the following order:
1. Ringing Intercom call.
2. Line or loop key (from lowest to highest).

Answering Outside Calls

• An incoming call on a line or loop key will flash red.
• An incoming call on your Direct Inward Line will flash green.
To answer an outside call:
1. Lift the handset.
a) If you have Ringing Line Preference, this will answer the incoming call.
b) If you have Automatic Handsfree, you can press the line or loop key without first lifting the handset.
2. Press flashing line or loop key.
a) The key will be on (green) after you answer the call.
To set up Line Key ringing at your keyset:
: Go to next selection.
Next
of current option.
+ Select the Ring Key Assignments sub-menu.
Menu
41
Select
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Setting Up Line Key Ringing (Keyset)
: Go to previous selection.
Prev
: Exit Menu setup.
Exit
Your line keys will light. Press a line key repeatedly to set its ringing mode:
• Always (key LED is on green)
• Night Ring (key LED flashes slow green)
• Delay Ring (key LED flashes fast green)
• Lamp Only (key LED is on red)
Dial a digit (0-4) to set the Ring Type:
for Standard
0
for Ring Type A
1
for Ring Type B
2
for Ring Type C
3
: Select current Option.
Select
http://www.renderx.com/
: Back out
Back