Reset Button; Audio Out - NEC MP-01 User Manual

Contents
• Memory card
• Memory card cover
• Wireless remote control
• AA batteries x 2
• Wireless remote control extension
cable
• Double sided tape
control extension cable)
Terminal panel
1
POWER RESET
7
1DC IN connector
Connect the enclosed AC adapter.
2Memory card connector
Set the enclosed memory card.
3S-VIDEO IN connector
Connect with video devices, such as DVD players, and movies from
video devices can be placed with messages and still images.
Use an S video cable (available in stores).
4Power Indicator
Power button ON: Green light turns on
Power button OFF: Green light flashes then red light turns on
5Remote control sensor
This is the light receiving part of the signal from the wireless
remote control.
6Wireless remote control extension connector
In cases such as when the remote control sensor is hidden behind
the liquid crystal display, connect the enclosed wireless remote
control extension cable.
Secure the light receiving end of the wireless remote control
extension cable in a position from which remote control operation
is possible using the enclosed double-faced adhesive tape.
(for Wireless remote
2 3
SD
AUDIO AUDIO
IN OUT VIDEO IN
8 9
• Video signal cable
• Audio cable
• USB cable extension
• Bracket x 2
• Power Cord
• AC adapter
• Set up guide
• CD-ROM
(User's Manual & software)
DVI USB LAN
0 ! @

7Reset button

The main body is reset. Even if the reset button is pressed, the data in
the memory card will not be erased.
8AUDIO IN
When using the S-VIDEO IN connector, this is connected to
the audio output from a video device.

9AUDIO OUT

This is connected to the AUDIO IN of the liquid crystal display.
0DVI OUT
This is connected to the DVI input connector of the liquid
crystal display.
!USB memory connector
This is used when distributing program data via USB memory
or when updating internal firmware.
If it is difficult to use the connector for USB memory due to
the location installed, use the enclosed USB cable extension.
@LAN connector
This is connected to the LAN cable when distributing program
data via LAN.
#External connector
Terminal used for maintenance.
Cannot be used.
5
(DVI-D-DVI-D)
(DXW1225N-S0068Z)
4 5 6
RS232
#