Table of Contents
Advertisement
Connection and setting
5.
Set the wireless remote control extension cable in the wireless remote control extension cable
connector. Secure the light receiving part at the end of the cable with the enclosed double-
faced adhesive tape in a location where the light of the remote control can reach it easily.
NOTE:
When using the remote control sensor on the rear side of the equipment, do not connect the wireless remote control extension cable. When the wireless
remote control extension cable is connected, the remote control sensor on the rear side of the equipment will not work. If it is difficult to operate the remote
control using the remote control sensor on the rear side, use the wireless remote control extension cable.
6.
Connect a video signal cable (DVI-D-DVI-D) to the DVI OUT.
7.
Connect the signal cable to the DVI input connector of the Display.
8.
Connect the audio cable to the AUDIO OUT and connect the other end to the AUDIO IN of
the Display.
9.
Switch on the Display. Set the input signal of the Display to "DVI."
10. Set the plug of the AC adapter cable into the DC In connector.
11. Securely insert one end of the power cord into the power connector of the AC adaptor.
12. Connect the power plug to the AC power source. The power of the Media Player is
automatically switched on.
Warning
• Do not use the equipment with a source voltage other than what is displayed. Doing so may cause fires or electric shock.
• If the power code provided with this Media Player doesn't match the voltage of the power outlet, please use a power cord that matches
the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
• Always use the AC adaptor (DXW1225N-S0068Z) enclosed with the equipment. Using other AC adaptors may cause smoke or
sparks.
• When connecting an AC adaptor, make sure that the cord is not bent or placed under the equipment.
• The power cord and AC adaptor enclosed with this equipment should be used only with this equipment. To ensure safety, do
not use with other equipment.
Attention
• Make sure the area around the power source is such that the power plug can be easily plugged in and pulled out.
NOTE:
When starting the Media Player for the first time or resetting the equipment, the message "Factory reset is done" may be displayed.
Setting
Language setting
In the default conditions, the language of the OSD menu is set to English. To change the language setting to other language, press the menu
buttons of the remote control and display the OSD screen, and change the "LANGUAGE" on the OSD display to other language.
Date/Time setting
To display a program on the Media Player according to the set schedule, "DATE/TIME" setting is required. Press the MENU buttons of the remote
control and display the OSD screen, and set the Date and Time.
VIDEO OUT
Set the "VIDEO OUT" according to the optimum resolution of the Display.
For other settings, refer to "OSD."
NOTE:
• About the automatic OFF function of VIDEO OUT
• For periods of time in which programs are not set, the VIDEO OUT is switched OFF to conserve energy.
(When the product is first purchased, programs are not set, so it is always switched OFF.)
• In Video out off, OSD can be displayed by MENU button on remote control.
(continued)
9
Advertisement
Table of Contents
