To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the SK-96390-100PMC Board and all its deliverables (e.g. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in...
Overview 0 Overview 0.1 Abstract The SK-96390-100PMC is a multifunctional evaluation board for the Fujitsu 16FX Flash microcontroller MB96390 Series. It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.
SK-96390-100PMC User Guide Overview 0.2 Features < Supports Fujitsu’s 16FX MB96390 Series with 100 pin PMC / M20 package or the MB2198 Emulator System with the Probe Cable MB2198-510-E. < 9-15V unregulated external DC power supply < On-board 5.0V and 3.3V linear voltage regulator <...
SK-96390-100PMC User Guide Overview 0.3 General Description The SK-96390-100PMC supports the F MC-16FX microcontrollers of MB96390 Series with LQFP100-M20 (PMC) package. It can be used as a stand-alone evaluation board or as a target board for the emulator debugger. 0.3.1 MCU Clocks The board is supplied with a socketed 4 MHz crystal as main oscillation source.
1. Power up the Emulator Main Unit (MB2198-01) 2. Power up the Adapter Board (MB2198-500), if needed 3. Power up the target Board (SK-96390-100PMC) To turn off the system, switch off the components in reverse order, beginning with the target Board.
Page 26
2) Connect the configured UART (see above) to your serial PC communication port. A straight 1:1 cable connection has to be used. 3) Start the tool “Fujitsu Flash MCU Programmer” software and make the settings: Set Device Type Select COM Port...