To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the SK-96320-80PMC Board and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in...
Chapter 1 Overview 1 Overview 1.1 Abstract The SK-96320-80PMC is a multifunctional evaluation board for the Fujitsu 16-bit Flash microcontroller series MB96320. It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.
SK-96320-80PMC User Guide Chapter 1 Overview 1.3 General Description The SK-96320-80PMC supports the 16-bit Flash microcontroller MB96320 Series. It can be used as a stand-alone evaluation board or as a target board for the emulator debugger. The evaluation board supports the following package: FPT-80P-M21.
When turning on the system, be sure to use the following power-up sequence: 1. Power up the emulator main unit (MB2198-01) 2. Power up the adapter board (MB2198-500) 3. Power up the target board (SK-96320-80PMC) To turn off the system, switch off the components in reverse order, beginning with the target board.
4.1 Asynchronous Mode In order to program the Flash-ROM asynchronously, the tool “Fujitsu Flash MCU Programmer for FMC16FX” can be used. This tool is available free on the Fujitsu Micros DVD or Web Site (http://mcu.emea.fujitsu.com/: select < Software < Utilities) The following procedure must be followed to enable Flash Programming: 1.
Page 23
Chapter 4 Programming the internal Flash memory 6. Check that the Reset LED is off. Otherwise change the DTR polarity (JP35) and check the power supply voltage. Start the tool “Fujitsu Flash MCU Programmer for FMC16FX” software and follow the instructions: MB96F326R Figure 4-1: Settings for Automatic Mode 7.