Procedure 2-2 Dhcp And Dns Install Script - Motorola 2.1 Networking Setup Manual

Chapter 2: Network Setup
Running the DHCP and DNS Install Script
Prerequisites
All prerequisite conditions must be observed to ensure proper installation of the additional
components required to support the One Point Wireless Manager™ application on a Linux
platform.
1. You must be logged on as the root user under a KDE Session. At the Welcome to
WMS screen, select KDE under the >Session menu at the bottom of the screen.
Click the OK button to continue.
2. Enter the Username: root and press Enter.
3. Enter the Password: g0ld11 and press Enter.
The following
/opt/motoMeshDuo_setup as a working directory. This script will set up DHCP and DNS as
specified by the small system reference design. It will also install the r0kd daemon which is
required if EAP-TTLS Secure Mesh is going to be used.
Procedure 2-2 DHCP and DNS Install Script
Insert the CD containing the Linux environment setup archive into the CDROM drive.
1
Right-click on the desktop and select Open Terminal to launch a new terminal shell.
2
Execute the following commands:
mkdir /opt/MotoMeshDuo_setup
cp -f /media/cdrom/Tools/motomesh_duo_linux_setup.tar.gz /opt/MotoMeshDuo _setup
cd /opt/MotoMeshDuo _setup
zcat motomesh_duo_linux_setup.tar.gz | tar xf -
bash ./install
Observe the following prompt:
3
Do you want to setup Networking? This will overwrite any existing network settings. [yes or
no]
Enter yes.
Observe the following prompt:
4
Do you want to use this machine as a DHCP server?
Enter yes.
Observe the following prompt:
5
Do you want to start the DHCPD service?
Enter yes.
steps are required
2-19
to install the Linux environment setup