Table of Contents
Advertisement
Chapter 3: MOTOMESH Duo Hardware
Since Type B grounding requirements stipulate 5 ohms or less impedance to earth ground,
things such as soil pH, type of grounding rods, size of conductors, and ground enhancing
materials must be taken into account to achieve this goal. To verify the impedance
requirements are met, a special Earth/Ground Resistance Tester (megohmmeter) may be
necessary.
•
To avoid damage to the equipment, adequate grounding for all MOTOMESH Duo
devices is mandatory.
Flying Lead Power Cable
A 12 foot "flying lead" cable is available for AC and DC devices. Different power plug options are
available to support different country requirements. See Appendix A for detailed information on wiring.
Wiring detail for US AC installations (AC Flying Lead Cable Part # 3071331H01):
White wire
Neutral
Black Wire
Line
Green
Earth Ground
Red
Not Used
Figure 3-5
If the MOTOMESH Duo Device is attached to a light arm and the attachment
point meets the Type B grounding requirements, then the grounding stud
attachment point is not required to be used.
12ft AC Flying Lead Cable (3071331H01)
3-7
Advertisement
Chapters
Table of Contents
