Motorola CA50 Developer & User Manual page 435

Screw the bracket to the cradle(s).
2.
CHS5000-8000CR: Screw the two supplied .5" Phillips screws into the two bracket flanges and tighten until the
cradle is securely attached to the bracket (as shown in drawing A,
SAC5000-8000CR: Screw one supplied .5" Phillips screw in each flange and tighten one flange to each cradle
(as shown in drawing B,
A
Screw the Bracket to the Cradle
Figure B-16
Use six screws (not supplied) to mount the bracket(s) to a wall.
3.
NOTE Ensure to use additional wall mounting hardware, as needed, for safe mounting to the wall type.
Mount Bracket(s)
Figure B-17
Figure B-16).
Figure B-16).
B
Accessories B - 17