Connecting To The Ca50; Downloading Data Using An Activesync Connection - Motorola CA50 Developer & User Manual

Connecting to the CA50

After ActiveSync installation is complete, the ActiveSync Setup Wizard may start automatically to set up a
partnership between the CA50 and host computer. Cancel the Wizard set up as setting up a partnership is not
required. When the CA50 is connected to the host computer, a connection initiates automatically and no setup is
required.
To create a connection between the CA50 and host computer:
Connect the small end of the USB cable to the CA50 client and the large end of the USB cable to the
1.
appropriate USB client port on the host computer.
When the CA50 client device is detected by the host computer, the ActiveSync Connected window displays.
2.
Connected Window
Figure G-3

Downloading Data using an ActiveSync Connection

To download data from the host computer to the CA client via ActiveSync:
Connect the CA50 client to the host computer using a USB cable.
1.
Host Computer USB Port
Connecting the CA50
Figure G-4
CA50 USB Client Port
ActiveSync G - 3