Step 10. Deploy Ca50S; Deploy Ca50S At The Site Location; Validate That The Ca50 Was Deployed Properly; Employee Logs In To The Uca Server - Motorola CA50 Developer & User Manual

D - 18 CA50/UCA Client & Server Developer & User Guide

Step 10. Deploy CA50s

Prepare the CA50: Insert a charged battery into the device (see

Deploy CA50s at the Site Location

• Warm boot to CA Menu (see
the left soft key.
Launch the Rapid Deployment Client on the CA50 from the CA50 Menu (see
•
Scan the RD bar codes created in step
•
• The CA50 device is ready to use. Press OK to continue.

Validate that the CA50 was Deployed Properly

• From the CA Menu use the Up and Down keys to scroll and select Warm Boot to boot the CA50.
NOTE To automate the warm boot of the device and automatically launch the UCA client application, see
12-2.
• Wireless signal strength bars appear in the upper left corner of the CA50 display. This shows
connectivity.
• The UCA client application on the CA50 launches and negotiates/registers with UCA server.
• The CA50 displays Scan bar code to log in.
Scan bar code
to log in
Exit
Login Prompt
Figure D-13

Employee Logs in to the UCA Server

• Scan external UserID bar code (these bar codes were generated in Step 5 on
•
1001 for User1
•
1002 for User2.
• The UCA server validates the user ID.
• If a valid UserID is found, the UCA server sends the completed base XML profile back to the CA50 user
device. See step
5. Create an XML Profile Called "Footwear.xml" on page
• The CA50 user should see their user name and phone book extension on the CA50 display.
NOTE For a fully functional Demo Solution that enables price lookup, voice calls and walkie-talkie
communication, see
Go to Menu>Applications, to see the application by name Footwear was created in using profile builder.
Launching it hits the URI (http://192.168.0.253/Footwear/Footwear.aspx) that was assigned when creating the
menu.
From desktop, navigate to Menu>WT Channels, to see the channel Footwear displayed. This was created
using UCA Profile builder, set to listen on channel 3.
Performing a Warm Boot on page
Step 7. Generate Employee Login Bar Codes on page
Step 6. Populate the UCA Server Database with 2 Users on page D-11
Appendix E, Self Contained Pre-Built Demo.
page 3-4, 3-8).
4-17). To go to CA Menu, press and hold
CA Menu on page
page
D-6.
3-12).
D-15.
page
D-15).
and step Step