Audio Indications; Screen Indications - Motorola CA50 Developer & User Manual

Audio Indications

CA50 Audio Indications
Table 4-4
Event
Walkie-Talkie Indications
Start Walkie-Talkie
communication transmit
Start Walkie-Talkie
communication receive
Voice (Unicast) Call Indications
Receive a call
Make a call
Busy
Scanning Indications
Active scanning/laser on
Successful decode
Network Indications
Connecting to network/server
Connected to UCA server
Connection failure
No connection/lost connection
Battery low indicator
Power Indications
Low battery

Screen Indications

Low battery
Audio Indications
Notification Indications
*The enable/disable of the low battery beep and the beep interval are controlled by registry keys:
[HKEY_LOCAL_MACHINE\Software\Motorola\UCAShell\UCAClient]
BatteryIconBeepEnable"=dword:1; 0 - Do not beep, 1 beep on low batt
BatteryBeepInterval"=dword:3C; time in seconds for the low battery sound to beep
Audio Status
Start walkie-talkie communication transmit tone
Start walkie-talkie communication transmit tone
Ring tone (end-user configurable)
Ringing tone (via receiver)
Busy tone (via receiver)
No sound
Successful decode tone
No sound
Connection tone
Single 'error' tone
Single 'error' tone
Plays an audio file (configurable in the profile)
Beeps every 60 seconds when the battery is 10 percent (or lower)*
Blinking battery icon
Audio indications for notification messages on the device are
configurable through the profile as well from the messaging API.
See SendNotification on page
CA50 Modes of Operation 4 - 11
11-26.