04.96
6.4
Data transfer NC PC
The following information is intended as help for transferring data to an external PC by means
of PCIN 4.2. The data are output by the NC in PC format, i.e. this format must be the default
setting in the SERVICES operating area.
Setting on the PC side:
9600 baud, no-parity, 8 data bits,
1 stop bit, RTS protocol,
BIN file = ON
Ready for operation no
Select PC format on the PCIN software
Enter
Data_in PC format
Enter
Enter file name
C:____________
Enter
(PC waits for data transfer)
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
6FC5197- AA60
6 Startup, Flowcharts
6.4 Data transfer NC
PC
6–5