HP P2000 G3 MSA Reference Manual page 64

6. When verify-fix has completed, re-enable background scrub:
a. Log in to the CLI.
b. Enter:
set job-parameters background-scrub on
7. Create a full backup of all data in the vdisk. HP recommends enabling all available verification
options. Compare with the original backup.
If errors occur during this procedure, or if the parity errors were not corrected or are seen again within a
short period of time, place a call with HP support. To help expedite your case, provide logs gathered at the
beginning of this procedure to HP support and a current copy of the logs.
64 Event descriptions