Panasonic UB-T780 Operating Instructions Manual page 49

3.
Pull the loose end of the cable tie to tighten it,
and install the power cord depending on the
location of the outlet, as illustrated in the
following diagrams.
•
When attaching the power cord downward.
•
When attaching the power cord along the lower
side of the elite Panaboard.
Fasten the power cord
with the cable tie.
Fasten the power
cord with the cable tie.
4.
Remove the screw (A) of the attachment cover
(B), which is fixed to the attachment board, and
slide the attachment cover down.
Ensure that the attachment cover and the screw
hole (C) of the board attachment are aligned.
1
After unscrewing the attachment cover screws (A),
fix them in the holes after sliding the attachment
cover down, as shown in the right-sided illustration
above.
5.
Hang the elite Panaboard on the wall mounting
plates with the screw heads.
Operating Instructions (For Basic Operations)
Installation Manual
1
3
2
49