Panasonic UB-T780 Operating Instructions Manual page 53

4.
Secure the elite Panaboard to the stand frame
using the two-wing bolts (M5 ´ 12 mm [
[2 count]) included with the stand.
Note
•
When installing the elite Panaboard on the
stand, you can adjust its height to 4 different
levels.
When changing the height, remove the left
and right screws from the back of the elite
Panaboard, and securely insert them at the
desired height. Torque (greater than 1 N·m
[10 kgf·cm (9 lbf·in.)]).
elite Panaboard
Height
-100 mm (-3 / in.)
7
8
Standard
+100 mm (+3 / in.)
7
8
+200 mm (+7 / in.)
7
8
5.
/ in.]
1
2
6.
Screw Position
Highest
2nd from top
2nd from bottom
Lowest
Wipe the screen board surface.
Gently wipe the screen board surface with a soft,
moist cloth.
Notice
•
Do not use thinner, benzene, or abrasive
chemicals to clean.
(Doing so can result in discoloration.)
Confirm that the elite Panaboard can operate.
See "Confirming the elite Panaboard
Operation" (page 54).
Operating Instructions (For Basic Operations)
Installation Manual
1
53