NEC UNIVERGE SV8100 Service Information Bulletin page 35

G355/G955 Quick Reference Guide
Turning the phone on and off
Press and hold the Red phone key for a few seconds.
Lock/unlock your phone
In Idle mode, press the Ok key, and then press the
Lock soft key. To unlock, press the Ok key, and then
press the Unlock soft key.
Make a call
In Idle mode, type the number you want to dial, and
then press the Green phone key.
Answer a call
Press the Green phone key.
End a call
Press the Red phone key.
Reject a call
Press the Reject soft key.
Make an enquiry call (broker call)
During a call, press the Green phone key and dial the
number of the party you want to consult. You can
toggle between the two parties, by pressing the
Green phone key. To transfer the first call to the
enquiry call party, press the Red phone key.
Change the volume
During a call, press the volume up or volume down
buttons on the side of the phone.
Use the speakerphone
During a call, press the Spk on soft key.
To deactivate: press the Spk off soft key.
Document No. SIB 244
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC
Australia Pty Ltd.
Mute a call
During a call, press the Mute soft key. To turn the
microphone on again, press the Unmute soft key.
Listen to voicemail messages
In Idle mode, press the Menu soft key, choose
Messaging, Inbox, select Listen to voicemail, and then
scroll to the required message. Press the Select soft
key. You may need to enter your VM number first.
Make a shortcut
In Idle mode, press the Menu soft key, choose
Settings, General, and select Shortcuts. Now you can
assign a function to one of the navigational keys.
Make a speed dialling key
In Idle mode, press the Menu soft key, choose
Contacts. Select the contact that you want to assign
and press the More soft key. Choose Speed dial and
press OK. Scroll to the speed dialling key number that
you want and press the Add/Replace soft key. (If a
number has already been assigned to this key, it will
be replaced.)
Register the handset
In Idle mode, press the Menu soft key, choose
Settings, Connectivity, Register. Select the required
base, OK. Enter the Park code, OK/Skip. Enter the PIN
code, OK. The PIN is generated by the DECT Manager.
Enter Network Name, Save. Enter Number, Save.
This is the phone number assigned to the handset.
35 52
Page of
st
1 July 2008