The UNIVERGE SV8100 can be configured for one of three capacities, 64‐port, 256‐port, or the unlimited 712‐
port system.
The table below highlights the system capacity of the SV8100 depending how many chassis are installed:
Universal Slots
Time Slots
TDM Ports
MLT/DLC
SLT/LC (‐24V)
OPX/DIOP (‐48V)
IP MLT Extensions
SIP Extensions
Analogue Trunks
BRI ISDN Trunks
PRI ISDN Trunks
IP Trunks (SIP)
VoIP Channels
VM/VRS Channels
V34 Modem
Comparison with previous systems:
Max. Port Capacity
Universal slots
Outside Lines
IP Handsets
Digital Handsets
Analogue Handsets
Wireless Handsets
CAR / VE
DSS Modules
Power Fail circuits
In‐Mail Ports
Notes:
•
The CD‐CP00‐AU (CPU) consumes one Universal Slot in the first chassis
•
Without a PZ‐ME50 installed supports one chassis only with a maximum of 64 ports.
•
Expanded or Unlimited requires the PZ‐ME50 and appropriate licensing.
•
PFT requires use of the 4COT blade and provides 2 connections per blade.
Document No. SIB 244
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC