A single version of main software will be provided for the SV8100 CD‐CP00‐AU (CPU). Capacity, features and
functionality provided by this software will be configured via activation codes (licenses).
To increase capacity beyond a single chassis or 64 ports, the PZ‐ME50‐AU Memory Module and licensing is
required. When this is installed, the CPU will run "mainex.bin" off the PZ‐ME50, rather than "main.bin" off the
CP00. Both are provided within each software package.
Software can be installed onto the CPU using one of the following methods:
• Direct via USB Memory Stick
• Remote via Dialup Modem (PZ‐VM21 required)
• Remote via LAN (license may be required)
Document No. SIB 244
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC