NEC 78K/0 Series User Manual page 84

ADJBS
[Instruction format]
[Operation]
[Operand]
None
[Flag]
Z AC
× ×
[Description]
• The A register, CY flag and AC flag are decimally adjusted from their contents. This instruction carries out
an operation having meaning only when the BCD (binary coded decimal) data is subtracted and the
subtraction result is stored in the A register (in all other cases, the instruction carries out an operation having
no meaning).
See the table below for the adjustment method.
• If the adjustment result shows that the A register contents are 0, the Z flag is set (1). In all other cases,
the Z flag is cleared (0).
Condition
AC = 0
AC = 1
84
CHAPTER 5 EXPLANATION OF INSTRUCTIONS
ADJBS
Decimal Adjust Accumulator for Subtraction
CY
×
CY = 0
CY = 1
CY = 0
CY = 1
User's Manual U12326EJ4V0UM
Decimal Adjust Register for Subtraction
Decimal Adjustment of Subtraction Result
Operation
A ← A, CY ← 0, AC ← 0
A ← A–01100000B, CY ← 1, AC ← 0
A ← A–00000110B, CY ← 0, AC ← 0
A ← A–01100110B, CY ← 1, AC ← 0