To Switch The Alarm Function On Or Off; Switching Off The Alarm; Switching Radio Mode On/Off - Silvercrest SKR 800 A1 Operating Instructions Manual

To switch the alarm function on or off
Requirement: The device is in clock/standby mode.
♦ Press the
on the display.
♦ Press the
switched off.
NOTE
► The alarm time can only be changed if the menu "Set clock" is executed (see section
Setting the time, alarm time and alarm type).
Switching off the alarm
♦ While the alarm is sounding, press the
24 hours.
If the alarm is not manually deactivated, the device will switch off the alarm automatically
after 1 hour.
Switching radio mode on/off
NOTE
► The technical features of this device enable an adjustable reception capability that
exceeds the permitted FM frequency range of 87.5–108 MHz. In some countries,
different national regulations may apply to the assigned radio frequency ranges.
Please note that information received outside of the assigned radio frequency ranges
may not be exploited, passed on to third parties or otherwise misused.
♦ Press the
♦ Press the
standby mode.
NOTE
► The display illumination is switched off between 11 pm and 5 am in the clock/
standby mode. This switch-off time is permanently programmed and cannot be
changed.
♦ Press the
SKR 800 A1
button briefly. The icon for the activated alarm function
button again briefly. The icon for the activated alarm function
button to switch the radio on.
button again to switch the radio off and thus put the device into clock/
or button to switch on the display illumination for a short time.
button 3 to switch off the alarm for
GB
IE
appears
is
11