Connecting An External Monitor - NEC LT265 User Manual

2. Installation and Connections

Connecting an External Monitor

Audio cable (not supplied)
AUDIO OUT
AUDIO OUT
PC CARD
LAN USB
R AUDIO IN L VIDEO IN S-VIDEO IN PC CONTROL COMPUTER 1 IN AUDIO IN COMPUTER 2 IN MONITOR OUT
AC IN
MONITOR OUT
RGB/VGA signal cable (supplied)
AUDIO
IN
RGB/VGA signal cable (not supplied)
Audio cable (not supplied)
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
image you're projecting.
To do so:
1. Turn off the power to your projector, monitor and computer.
2. Use an RGB/VGA signal cable to connect your monitor to the MONITOR OUT (Mini D-Sub 15 pin) connector on
your projector.
3. Connect the supplied power cable. See page 26.
4. Turn on the projector, monitor and the computer.
NOTE:
• The MONITOR OUT connector outputs an RGB signal during Standby mode.
• When the projector is in the standby mode, the image may not be correctly displayed while the cooling fans are running
immediately after turning on or off the power.
• Output sound level can be adjusted in accordance with the sound level.
• When audio equipment is connected, the projector speaker is disabled.
• Daisy chain connection is not possible.
19