Connecting Your Vcr Or Laser Disc Player - NEC LT265 User Manual

Connecting Your VCR or Laser Disc Player

S-Video cable (not supplied)
Video cable (not supplied)
Audio equipment
AUDIO IN
L
Use an RCA or S-Video cable (not provided) to connect the video and use RCA cables (not provided) to connect
the audio from your VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of an RCA cable to the video output (or one end of an S-Video cable to the S-Video output
connector) on the back of your VCR or laser disc player, connect the other end to the appropriate video input on
your projector. Connect one end of a pair RCA cables (not supplied) to the audio output on the back of your VCR or
laser disc player, connect the other end to your audio equipment or to the appropriate audio input on the projector.
3. Connect the supplied power cable. See page 26.
4. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output
requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via
a scan converter.
VIDEO IN
PC CARD
R AUDIO IN L
AC IN
R
S-VIDEO IN
AUDIO OUT
LAN USB
VIDEO IN S-VIDEO IN PC CONTROL COMPUTER 1 IN AUDIO IN COMPUTER 2 IN MONITOR OUT
VCR/ Laser disc player
VIDEO S-VIDEO L
VIDEO OUT AUDIO OUT
Audio cable (not supplied)
21
2. Installation and Connections
R