Service And Repairs - Hitachi N3804AB3(S) Instruction And Safety Manual

English
5 Close guide plate and latch.
6 In case of frequent jam, contact a Hitachi
authorized service center.
2. Storing
When not in use for an extended period, apply a
thin coat of the lubricant to the steel parts to avoid
rust.
Do not store the Stapler in a cold weather
environment.
Keep the Stapler in a warm area.
When not in use, the Stapler should be stored in a
warm and dry place.
Keep out of reach of children.
3. WARNING LABEL
Change the WARNING LABEL if missing or
damaged.
A new WARNING LABEL is available from a Hitachi
authorized service center.
4. Maintenance chart (See page 19)
5. Operator troubleshooting (See page 19)
6. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION:
Repair, modification and inspection of Hitachi
Power Tools must be carried out by an Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance. In the
operation and maintenance of power tools, the
safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved and
modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
18

SERVICE AND REPAIRS

All quality Staplers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE:
Warning label
WARNING
Only service personnel trained by
Hitachi, distributor or employer shall
repair the Stapler.
Use only parts
recommended by Hitachi for repair.
Specifications are subject to change without any
obligation on the part of HITACHI.
supplied or