Fujitsu control 4 0812 User Manual page 32

3. Explorer
6. Type the HTTP and HTTPS port numbers in the HTTP Port and HTTPS Port
fields, respectively, if the port numbers were changed for the switch in the
serial console.
7. Complete one of the following steps:
• Click another tab to change additional properties.
• If finished, click OK to save the new settings.
• Click Cancel to exit without saving the new settings.
Information properties
Information properties include description, contact phone number, and comment
information. You can use these fields to store any information you require.
To view or change information properties:
1. Select a unit in the Unit list.
2. Complete one of the following steps:
• Select View-Properties from the Explorer menu.
• Click the Properties button.
• Right-click on the unit. Select Properties from the pop-up menu.
The Properties window opens.
3. Click the Information tab. You can enter any information in the following
fields.
a. In the Description field, enter 0 to 128 characters.
b. In the Contact field, enter 0 to 128 characters.
c. In the Contact Phone Number field, enter 0 to 64 characters.
d. In the Comment field, enter 0 to 256 characters.
4. Complete one of the following steps:
• Click another tab to change additional properties.
• If finished, click OK to save the new settings.
• Click Cancel to exit without saving the new settings.
Connections properties
Connections properties are available only for target devices and are read-only.
The display indicates the physical connection path that is used to access this
26
590-1059-640A