Fujitsu control 4 0812 User Manual page 38

3. Explorer
To view or change DirectDraw support:
1. Select Tools-Options from the Explorer menu. The General Options window
opens.
2. In the DirectDraw field, select or clear the DirectDraw check box.
3. Complete one of the following steps:
• Click another tab to change additional properties.
• If finished, click OK to save the new settings.
• Click Cancel to exit without saving the new settings.
HTTP/HTTPS options
The switch and the Explorer use port 80 as the default HTTP port and port 443 as
the default HTTPS port. You can change the default port numbers used in the
HTTP/HTTPS Ports tab of the Options dialog box.
To change HTTP/HTTPS options:
1. Select Tools-Options from the Explorer menu. The Options dialog box
appears.
2. Click the HTTP/HTTPS Ports tab.
3. Enter the appropriate ports in the HTTP Port and HTTPS Port fields.
4. Complete one of the following steps:
• Click another tab to change additional properties.
• If finished, click OK to save the new settings.
• Click Cancel to exit without saving the new settings.
VNC options
The Explorer supports a user-defined VNC viewer through the properties page. In
the VNC tab you can search for a user-specific VNC application and include its
command line arguments. A selection of macros is available for placement in the
command line; this may be useful for automatic replacement of variables such as
IP address, port number, user name and password. For VNC commands that do
not provide their own GUI, such as those for computers running standard
Windows, Linux and Unix operating systems, you may have the VNC application
launch from within an OS command window.
32
590-1059-640A