Cleaning Cradle Connectors - Motorola ET1 User Manual

ET1 Enterprise Tablet User Guide
Procedure Steps
1 Remove the main battery from mobile computer.
Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.
2
3 Rub the cotton portion of the cotton-tipped applicator back-and-forth across the connector. Do not leave any
cotton residue on the connector.
4 Repeat at least three times.
Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
5
6 Use a dry cotton-tipped applicator and repeat steps 4 through 6.
Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
7 Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface.
8 Inspect the area for any grease or dirt, repeat if required.

8.3.2 Cleaning Cradle Connectors

To clean the connectors on a cradle:
8-4
MN000022A01 - May 2013