ET1 Enterprise Tablet User Guide
Procedure Steps
1
Touch
.
2
Touch
Bluetooth.
If Bluetooth is not on, slide the switch to the ON position.
3
4
In the PAIRED DEVICES list, touch and hold on a unconnected Bluetooth device until a menu appears.
5
Touch Connect. When connected, the device is displayed as connected in the list.
5.9 Selecting Profiles on the Bluetooth Device
Some Bluetooth devices have multiple profiles. To select a profile:
Procedure Steps
1
Touch
.
2
Touch
Bluetooth.
3
If Bluetooth is not turned on, slide the blue switch to the On position.
4
In the PAIRED DEVICES list, touch
5
Under PROFILES, check or uncheck a profile to allow the ET1 to use that profile.
Touch
.
6
5.10 Unpairing a Bluetooth Device
To unpair a Bluetooth device and erase all pairing information:
5-6
next to the device name.
MN000022A01 - May 2013