Replacing The Filter - Hitachi EP-A8000 Instruction Manual

Filter Replacement
For the filters, use the optional EP-A6000-902 (dust filter) and EP-A6000-903 (deodorizing filter).
CAUTION
Before replacing the filter, be sure to stop the purifier and unplug the power cord from the AC outlet.
Remove the water tank and then pull out the water tray.
(This is to prevent water leakage.)
CAUTION
Remove the panel and the pre-filter.
Remove the used filter.
Remove the dust filter and then the deodorizing filter.
Take a new deodorizing filter
out of its plastic bag and install
it on the purifier.
Install the deodorizing filter so that its black
surface faces the front (white surface in the
back).
Insert the filter all the way until the label
(deodorizing filter position indicator) is hidden.
Be sure to take the filter out of the plastic bag.
Do not block the front face of the filter with
cloth or paper.
The same precautions should also be
followed for the dust filter.
Take a new dust filter out of its plastic
bag and install it on the purifier.
P. E- 9
Insert the filter all the way until the label (dust filter
position indicator) is hidden.
Install the pre-filter on the purifier.
Reinstall the panel on the purifier.
Install the water tray, and then mount the water tank.
No cleaning effect can be expected if the filter is inserted while still inside the plastic bag.
Note
This may also cause a malfunction.
E-28

Replacing the Filter

Use a genuine filter for the Hitachi Air Purifier.
Other filters may cause unit failure.
When you remove the water tank, water may drip from the tank cap.
Lay a dry cloth before removing the water tank.
P. E- 8
CAUTION
(Continued)
P.E-9
Deodorizing filter
Dust filter
The back
(White)
Front side(Black)
Deodorizing filter
(Black surface)
Dust filter Deodorizing filter
P.E-10
P.E-11
White
surface
P.E-12