General Information - Siemens 670 V2 Operating Instructions Manual

Safety information and general information

2.2 General Information

2.2 General Information
Overview
Caution
The device is approved for operation in closed rooms only.
Notice
The guarantee is void if these stipulations are ignored.
Avoid extreme environmental operating conditions. Protect your device against dust,
moisture and heat. For additional information, refer to the specifications.
Do not place the device in direct sunlight.
Transport
Unpack the device at the its installation location. Transport the device only in the original
packaging. Do not transport the device when it is mounted.
Notice
Adhere to these stipulations each time the device is transported, otherwise the guarantee is
void.
Caution
Condensation
When transporting the device in low temperatures, ensure that no moisture gets on or in the
device. This also applies when the device is subjected to extreme changes in temperature.
Commissioning
Allow the device to slowly adjust to room temperature before commissioning the device. Do
no place the device near heat radiation. If moisture condensation occurs, wait at least about
12 hours before you switch on the device.
Vibration
CD/DVD drives are sensitive to vibration. Vibrations during operation may result in loss of
data or damage to the drive or data medium.
Before transporting the device, wait at least 20 seconds to allow the drive to stop completely.
Updates
Regularly check if hotfixes for your device are available at the Siemens Internet site.
2-2
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Panel PC 670 V2/870 V2, Control unit