Using The Channel (Ch) Button; Checking Signal Information And Status Of The Main Unit - Canon dp-v3010 Instruction Manual

Using the Channel (CH) Button

You can assign channels (various settings related to input signal) to the CH buttons on the display controller and switch
channels instantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings"→"Display Controller Channel" and press the SET button.
A new window opens and displays button names CH1 to CH4.
3. Select a button name with the
The selection frame moves to next OSD menu level.
4. Select the channel to assign with
See "Channel Settings" (
5. Press the SET button.
The setting is confirmed.
The channel buttons on the display controller are preset with the following factory defaults.
Input Configuration
Select Input Signal
Format
Color Range
Internal Sync
Picture Mode
Channel Name

Checking Signal Information and Status of the Main Unit

The video display is equipped with a banner function which displays signal information or the status of the main unit.
1. Press the SET button when the OSD menu is closed.
The channel name, signal information, and status of the main unit will be displayed in the banner. It will automatically
disappear after 4 seconds.
Note
• For more detailed signal information, please refer to the section on "Signal Information" (
• The "Detecting sync." banner will continue to appear until the input signal is synchronized.
26 Operating the Display Controller
buttons and press the SET button.
.
40) for the configurable settings.
CH1
3G/HD-SDI 1
4K Input
Automatic
Full
Off
DCI-P3
(Blank)
CH2 CH3
3G/HD-SDI 2 Dual Link
HD-SDI
4K Input 4K Input
Automatic Automatic
Full Full
Off Off
DCI-P3 DCI-P3
(Blank) (Blank)
CH4
DisplayPort
4K Input
Automatic
Automatic
Off
DCI-P3
(Blank)
53).