Canon dp-v3010 Instruction Manual page 41

Item
Color Range
Internal Sync
Picture Mode
Channel Name
The factory default settings for each channel is shown in the following table.
Input Configuration
Select Input Signal
Format
Color Range
Internal Sync
Picture Mode
Channel Name
Setting Options (underline indicates factory default)
Sets the quantization range.
• SDI Signal
Full: Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limit Range 1: Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White Level: 940 (10-bit)/3760 (12-bit)
Limit Range 2: Limits black range.
Black level: 64 (10-bit)/256 (12-bit)
White Level: 1023 (10-bit)/4095 (12-bit)
• DisplayPort Signal
Automatic: Automatically switches the quantization range.
Full: Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limit Range 1: Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White Level: 940 (10-bit)/3760 (12-bit)
Synchronizes four inputs for "4K Input".
On: Force synchronization.
Off: Do not force synchronization.
Sets the "Picture Mode".
Sets the name of the selected channel. You can input up to 16 alphanumeric characters.
CH1
3G/HD-SDI 1 3G/HD-SDI 2
4K Input 4K Input
Automatic Automatic
Full
Off
DCI-P3 DCI-P3
(Blank)
CH2 CH3
Dual Link HD-SDI
4K Input
Automatic
Full Full
Off Off
DCI-P3
(Blank) (Blank)
CH4 CH5 to CH30
DisplayPort –
4K Input 4K Input
Automatic Automatic
Automatic Full
Off Off
DCI-P3 DCI-P3
(Blank) (Blank)
– : not set
OSD Menu 41