Table of Contents
Advertisement
■ ■ Export/Import■Main■Menu■Settings■(
1.■ Press■the■MENU■button■to■open■the■OSD■menu.
2.■ Select■"Function■Settings"→"Settings■Export/Import".
3.■ Select■"Export"■or■"Import"■with■the■
4.■ Select■"Execute".
When the confirmation screen appears, select "OK". Export/Import starts.
Exporting
Select "Execute" to save the file "dinfo.dat" to the root folder. If the same file name already exists, it will be
overwritten.
Importing
Select "All" or "Main Menu Name" in "Settings" and then select "Execute" to import "dinfo.dat" from the root folder.
■ ■ Export/Import■ASC■CDL■Parameters■(
1.■ Press■the■MENU■button■to■open■the■OSD■menu.
2.■ Select■"System■Settings"→"Display■Controller■Function".
Select the F button to configure and assign "CDL Export/Import".
3.■ Press■the■assigned■F■button■and■select■"Export"■or■"Import"■with■
4.■ Select■"Execute".
When the confirmation screen appears, select "OK". Export/Import starts.
Exporting
Select a file format ".ccc" or ".cdl" and then select "Execute" to save to the root folder.
Importing
Select a file with extension ".ccc" or ".cdl" from the root folder and then select "Execute" to import the file.
Reference
• When exporting, the file is saved automatically with the file name "cdl_000 to 999 (consecutive number)" and the selected
file format (e.g. cdl_000.ccc).
• Up to 1000 CDL import files are recognized.
• For ".cdl" format files, the settings of "Picture Mode" are exported in addition to CDL parameters. When imported, the
settings of "Picture Mode" will be applied.
• In the following conditions, data in ".cdl" format exported from this product cannot be imported to products of which
firmware version is earlier than the version of this product. To import data, update the firmware to the latest version.
- Picture Mode: ITU-R BT.2020, ACESproxy
- Color Temperature: D60, Gain R/G/B, Bias R/G/B
- Gamma: Canon Log to DCI 1.2
- Color Gamut: ITU-R BT.2020, Cinema Gamut to 709, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI
• It may be convenient to assign the "CDL Save to Memory" to an F button from the "Display Controller Function" of the OSD
menu for channel switching (
30
Using the OSD Menu
49)
■buttons.
51)
51). The temporarily saved content is erased when power is turned off.
■buttons.
Advertisement
Table of Contents
