Table of Contents
Advertisement
Item
Calibration
Luminance
Color
Temperature
Gamma
Color Gamut
Start
LUT Import
Anchor Adjustment
Reset
38
OSD Menu
Setting Options (underline indicates factory default)
Performs calibration based on set target values when "User 1-7" is selected for "Picture Mode".
Note
• When "Luminance" is set to high brightness, it may be calibrated beyond the brightness
adjustment range and set lower than the target value depending on the "Color Temperature"
setting. In that case, set the "Luminance" again.
Sets the target brightness.
2
48 to 200 cd/m
Sets the target color temperature.
D93, D65, D61, D60, D56, D50, DCI-P3: Select from preset color temperatures.
Custom: If you make adjustments by "x, y", the "Custom" mode automatically starts.
x, y: You can adjust CIE x, y in increments of 0.001.
x: 0.260 to 0.360 (in 0.001 increments)
y: 0.260 to 0.360 (in 0.001 increments)
Sets the target gamma.
2.2, 2.35, 2.4, 2.6, Canon Log to WideDR 1.1
Sets the target color gamut.
SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native
Performs calibration.
LUT can be imported when "User 1-7" or "Canon Log" is selected for "Picture Mode".
LUT Type (Gamma, Color Gamut): Select the LUT type.
File Name: Select a file.
Base Color Gamut (SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native): Select the
color gamut used when creating the LUT (when "Color Gamut" under "LUT Type" is selected).
Execute: Performs import.
Temporarily saves parameters while adjusting SHARPNESS, CHROMA, BRIGHTNESS, and
CONTRAST (anchor point setting).
OK: Performs anchor point setting.
Cancel: Returns to the previous screen without setting anchor point.
Return "Picture Mode" to factory default. Note that in "User 1-7" mode where you are performing
calibration, the setting returns to the value after calibration instead of the factory default.
When selected, the message "Reset Adjustment settings to defaults?" appears.
OK: Performs reset.
Cancel: Returns to the previous screen without resetting.
Deleting imported LUT
When you select "OK" for "Reset" and the resetting process is completed, a message is displayed to
ask you if you want to delete the LUT.
Erase: The LUT will be deleted.
Cancel: You can go back to the top screen without deleting the LUT.
Advertisement
Table of Contents
