Specifications - Toro Z Master Professional 6000 74922 Operator's Manual

Blade-Control Switch (PTO)
The blade-control switch (PTO) is used to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades,
push the blade-control switch (PTO) down or move a
motion-control lever into the neutral-lock position.
Ignition Switch
This switch is used to start the mower engine and has 3
positions: Start, Run and Off.
Motion-Control Levers
The motion-control levers are used to drive the machine
forward, reverse, and turn either direction.

Specifications

Note: Specifications and design are subject to change without notice.
Width:
Without Deck
Deflector Up
Deflector Down
Length:
Roll Bar - Up
Roll Bar - Down
Height:
Roll Bar - Up
179 cm (71 inches)
Weight:
Model
74922
74923
74925
74927
78922
78924
48-inch Deck 52-inch Deck
116 cm (46 inches) 116 cm (46 inches)
137 cm (54 inches) 146 cm (58 inches)
161 cm (64 inches) 172 cm (68 inches)
48-inch Deck 52-inch Deck
201 cm (79 inches) 201 cm (79 inches)
206 cm (81 inches) 206 cm (81 inches)
Neutral-Lock Position
The neutral-lock position is used with the safety-interlock
system to engage and to determine the neutral position.
Fuel Shutoff Valve
Close the fuel shutoff valve (under the seat) when transporting
or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
60-inch Deck
135 cm (53 inches)
157 cm (62 inches)
192 cm (76 inches)
60-inch Deck
211 cm (83 inches)
215 cm (85 inches)
Roll Bar - Down
119 cm (47 inches)
Weight
520 kg (1147 lb)
547 kg (1206 lb)
569 kg (1254 lb)
605 kg (1334 lb)
520 kg (1147 lb)
520 kg (1147 lb)
16
72-inch Deck
150 cm (59 inches)
187 cm (74 inches)
222 cm (88 inches)
72-inch Deck
219 cm (86 inches)
223 cm (88 inches)