Cutting Height - Husqvarna 420 Operator's Manual

Reset
This function resets the timer to the factory setting, where
the robotic lawnmower is allowed to operate 24 hours a
day every day.
Current day
This resets the day that is selected in the tab system.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day.
All week
This resets all days in the week.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day every day.

6.4 Cutting Height

The cutting height can be varied from MIN (2 cm) to MAX
(6 cm).
During the first week after a new installation, the cutting
height must be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be reduced one
step every week until the desired cutting height has been
reached.
If the grass is long, allow the robotic lawnmower to start
mowing at the MAX cutting height. The cutting height can
be reduced gradually once the grass has become shorter.
To increase the cutting height:
1. Use the up arrow to increase to the desired height,
or specify a number directly with the keypad.
2. Press OK to confirm.
To lower the cutting height:
1. Use the down arrow to decrease to the desired
height, or specify a number directly with the keypad.
2. Press OK to confirm.
English - 46
1157866-26,420,430X,450X,EN_160314.indd 46
MENU FUNCTIONS
Cutting height
Cutting height
3012-1408
3012-1237
2016-03-14 16:59:10